The Cover Mould is an important tool for mass production of bottle caps. It seems that a simple and small bottle cap actually contains a lot of technical content. Looking at the information, we found that the processing principle of bottle cap mold injection is roughly as follows. Operate the same nozzle to inject two kinds of raw materials into th... read more
Whether it is a 5L, 10L or 20L Pail Mould, in-mold sticking is required. Here are the steps of sticking in the mold of the paint bucket. First of all, there must be a paint bucket mold with in-mold paste. The design method of in-mold paint bucket molds is different from ordinary paint bucket molds. When the product is designed, a 0.1mm limit is des... read more
No matter what specifications of the plastic barrel mold, such as 20L, 18L Pail Mould, their scope of application is summarized as follows: Plastic packaging barrels are mostly used for the storage and transportation of various liquids. They have good characteristics for special dangerous goods. They are not easy to break, rust, light, and not easi... read more
What aspects should be paid special attention to when opening plastic Pail Moulds? Many utensils and daily necessities in daily life are all made of plastic injection molding, such as plastic buckets and washbasins that we use every day. Here are some difficult points about plastic bucket opening molds and how to avoid them. There are not many diff... read more
Plastic Bucket Mould is one of our main products. The main raw material for the production of plastic barrels is polyethylene, or PE for short, which is a polymer organic compound made by addition polymerization of ethylene. Polyethylene is recognized as the best material in contact with food in the world. It is non-toxic, tasteless and odorless, a... read more