The bucket mold looks simple; in fact, there are many […]
The bucket mold looks simple; in fact, there are many factors to consider.
The design of the cooling system of the plastic bucket mold: The design of the cooling system is a relatively complicated task. We need to consider the cooling effect and uniformity, as well as the impact of the cooling system on the overall structure of the mold. Determine the specific location and size of the cooling system; key components, such as moving templates, cooling inserts; cooling side slides and side cores; cooling element design and cooling standard component selection. Our company began to analyze a series of problems in the mold design process. The mold uses circulating water to flow in all parts of the mold, thereby reducing the cooling time during the injection molding process, improving the production efficiency of the product, and greatly reducing the production cost.
The structure of the plastic barrel mold: the barrel mold adopts the I-shaped mold structure, the cavity and core are 2738HH, the slider, the guide groove and the insert are 2316 or 718H, the guide post, the guide sleeve, the gate sleeve, the tie rod and the reset The rod is a standard part of SKD. The barrel mould base adopts the standard base. Materials with good corrosion resistance, toughness, thermal conductivity and good material hardness make polishing easier, save production cycles, extend mold life, reduce maintenance time, reduce the risk of cracking and improve production efficiency.
We serve the global plastic mold parts industry, seek development by technology, survive by quality, and serve a stable market. You can get the best quality molds at the most favorable price; invest in the lowest cost to create the most efficient products.