20L Bucket Mould Manufacturers Introduction Mold closing height refers to the distance between the upper plane of the upper template and the lower plane of the lower template when the mold is in the lowest working position. When we lower the slider, we cannot directly set the closing height of the punch to the closing height of the mold, but to be ... read more
Precautions for maintenance of Plastic Bucket Mould : 1. When the injection mold is being maintained, it is necessary to check the parts according to the drawings. Even if there is no special instruction, the inspection should be stopped when entering the warehouse; the size of the mold parts that do not conform to the drawing rules can not ... read more
20L Bucket Mould Manufacturers introduces the trial strategy of injection mold: 1. Check whether the plastic material in the barrel is correct and whether it is baked according to the regulations. 2. The material pipe should be cleaned thoroughly to prevent inferior glue or miscellaneous materials from being injected into the mold, because inferior... read more
In the process of use, plastic buckets sometimes become brittle. Fragile plastic buckets will only be damaged, which is not conducive to long-term use. The brittleness of plastic barrels is closely related to the selection of production molds, raw materials, production machinery, and production processes. Below, 20L Bucket Mould Manufacturers intro... read more
Plastic Pail Mould Manufacturers introduces the change process of large injection molding processing dimensions: 1. Equipment failure. If the plasticizing capacity of the molding equipment is insufficient, the feeding system is unstable, the screw speed is unstable, the stop function is abnormal, the check valve of the hydraulic system is fa... read more